Call Us: 1-800-247-9105   ●   620-421-6950 (local)   Welcome, guest. (Login | Register)  

Stockton Door Style
Beech

Stockton Door Style - Beech

Finshes

  • Beech - WheatWheat
  • Beech - ChestnutChestnut
  • Beech - CoffeeCoffee
  • Beech - HuskHusk
  • Beech - KonaKona
  • Beech - NutmegNutmeg
  • Beech - PearPear
  • Beech - SlateSlate
  • Beech - StoneStone
  • Beech - TeakTeak
  • Beech - ToffeeToffee
  • Beech - VictorianVictorian
  • Beech - Polar WhitePolar White
FACE FRAMES (Beech)
  • Mortise and Tenon, Glued and Fastened
  • Horizontal Rails 3/4" X 1 1/2" Kiln Dried "Beech" Hardwood
  • Vertical Stiles 3/4" X 1 1/2" Kiln Dried "Beech" Hardwood

CABINET ENDS
  • Exposed Ends are 1/2", 45# Premium Particle Board
  • All Wall Cabinet Ends Rabbeted to Receive Tops & Bottoms
  • Base Cabinet Ends are Rabbeted to Receive Floor and Shelf

CABINET DOORS AND DRAWER HEADS
  • Doors - 5-Piece Beech Hardwood with 1/4" Beech Veneer Center Panel 1-1/4" Modified Full Overlay. Wide Stile and Rail Shaker Inside and Outside Profile
  • Drawer Heads - 3/4" Solid Kiln Dried Beech. Shaker Outside Profile.

DRAWERS
  • 7/16" Fiberboard Basecoated, Printed, Topcoated (4 Sides)
  • Bottom 1/8" Hardboard, Matches Interior
  • Sides are Rabbet Joint Machined all Four Sides
  • All Joints Glued and Power nailed

WALL CABINET & BASE CABINET SHELVING
  • Shelving 5/8" Premium Particle Board that is Banded with PVC Tape and is Fully Adjustable in all Wall Cabinets
  • Due to Plumbing Considerations, There is No Shelving in Sink Base
  • Base Shelf is Half Depth, Fully Adjustable

WALL CABINETS TOP & BOTTOM
  • Wall Cabinets Not Less Than 1/2" 45# Particleboard
  • Let into Sides and Face Frame. All Joints Glued and Power Nailed.

BASE CABINET FLOORS
  • Base Cabinet Not Less Than 1/2" 45# Particleboard
  • Let into Sides and Face Frame. All Joints Glued and Power Nailed. Back of Floor Set On Supporting Member, Glued and Fastened.

HARDWARE
  • Hinges are Concealed with a 6 Way Adjustable Option Featuring a Self-Closing 108* Opening
  • Drawer Slides - Side Mounted, 75# Load Capacity, Epoxy Coated, Lifetime Warranty / *Upgrades Available

CABINET BACKS
  • Backs are 1/8" Printed (HDF) High Density Fiberboard

FINISH
  • Conversion Varnish - A Hard Durable Finish That is Non-Yellowing and Offers Excellent Chemical Resistance
  • All Exposed Interior Sides, Shelving and Wall Cabinet Bottoms, GrandLam Clad (Except Hang Rails)
  • Cabinet Has Been Tested and Certified by National Kitchen Cabinet Association (Spec. ANSI 161.1)

Disclaimer
The samples for stain colors shown on your screen may not reproduce accurately, depending on monitor age, settings and other variables. Also, Grandview Products’ stains are highly transparent to show the natural color and grain pattern variation of quality wood. For true colors, consult a Grandview representative or view actual color block samples or door samples.

Links